L-6534VW Operation Guide Basic Operations (2) Attach the substrate to the paper core. c Important: ❏ Align the press-side edges of the substrate and the paper core, and then attach. ❏ Attach it firmly so that the tape does not peel off. H Close the rewinder roll cover on the press. I Press the Feed Ready switch on the press to apply tension to the substrate. Check that the Feed Ready switch lamp is on. c Important: Check the rotation status of the substrate. If abnormalities occur, such as slackness when winding the substrate, the rewinding direction may be wrong. Make the settings again on the Change Substrate screen. Subsequently, set for the substrate after replacement. 120