L-6534VW Operation Guide Basic Operations Start Printing Check settings on the touch panel and print. This section explains how to start basic printing. c Important: ❏ Before starting work or printing operations, make sure there are no foreign substances, such as cleaning tools, on the substrate or the drum. If the carriage comes in contact with any foreign substances, the carriage or the head and so on could be damaged. ❏ To maintain print quality, the press performs auto head maintenance at periodic intervals. You cannot change the maintenance intervals. ❏ The auto nozzle check detects nozzles that have errors, such as missing nozzles due to air bubbles after cleaning.
❏ When starting a job, we recommend performing a visual inspection of the print results to check for any clogged nozzles and so on. Note: When using the additional UV lamp curing unit, make sure that the power breaker for the additional UV lamp curing unit is set to ON before printing. A Check that the press switch is set to the Standby position. B Perform printing from the print application software, and then check that the print data was received on the touch panel. See the following for more information on each icon displayed in next job info.
U “Operation Status Screen” on page 34 "Next Job Info." When other jobs have already been received, or when Operation when Receiving is set to Pause in Print Job Reception Settings , it is not displayed in the next job info. In this case, check the Job Management screen. 134