L-6534VW Operation Guide Basic Operations Cleaning Nozzles To check print quality before printing, print nozzle check patterns and check nozzles for clogging. Perform head cleaning when the nozzles are clogged. Checking with Nozzle Check Pattern A Change the substrate if necessary. Load substrate at a width that matches the width used for a nozzle check. When checking using the largest print width (330 mm), load substrate with a width of 340 mm. U “Replacing the Substrate” on page 98 B In Check Print Quality in the Maintenance screen, press Print Nozzle Check Pattern , and then press Yes on the screen displayed. The nozzle check pattern is printed. c Important:
After printing a nozzle check pattern, press Operation Status from the menu on the left to return to the Operation Status screen. C To cut off the print results, press the Feed Ready switch on the press to release the tension in the substrate. Check that the Feed Ready switch lamp is off. 152 Contents Reference Print nozzle check patterns and check nozzles for clogging. U “Checking with Nozzle Check Pattern” on page 152 Clean clogged color heads individually. U “Clean the Heads Individually” on page 154