L-6534VW Operation Guide Various Print Settings Continuing Printing from the Previous Day This section explains how to restart printing when you had to stop printing the previous day. c Important: A margin of approximately 200 mm is included when continuing print jobs from the previous day in normal printing. Contents Finishing Work U “Finishing Work” on page 204 Check the number of print outs, and then cancel the print job. Perform reverse feed of the substrate so that margins are not inserted when printing restarts. Complete daily maintenance and shutdown the press.
Starting work U “When starting (normal printing)” on page 207 U “When starting (additional printing)” on page 210 Finishing Work This section explains the procedure of finishing work. 204 Normal printing Additional printing Startup the press and perform the startup inspection. Startup the press and perform the startup inspection. Feed the substrate so that margins are not inserted when printing restarts. Feed the substrate so that margins are not inserted when printing restarts. Feed the previous day's print results to the rewinder side workbench. Adjust the eye mark sensor. Confirm that Reverse Feeding is set to Apply in Preset for Reverse Feeding.
In Preset for Printing, confirm that Additional Printing is set to Apply. Enter the number of remaining copies, and then restart printing. Enter the number of remaining copies, and then restart printing.