L-6534VW Operation Guide Overview of the Product Buttons When the press is in the Printing status 36 Let ter Item Explanation f Substrate Width Displays the width of the substrate set on the Substrate Settings screen. Used Displays the total amount of substrate fed. Reset button Press the Reset button to reset the feed amount to 0. g Ink Levels You can see the remaining amount of ink for each ink cartridge. Displays an × mark when the amount of ink remaining drops below the minimum value. h Ionizer button Displays whether the ionizer is on or off. You can manually turn the ionizer on/off during printing. i UV Light button Displays whether the additional UV lamp curing unit is on or off.
We recommend setting this to Off if you are not using the additional UV lamp curing unit. j Drum temperature Displays the drum temperature. Maximum drum Temp. Displays the temperature when printing is paused to cool down the drum. Temperature status Normal operating temperature (Blue) Abnormal operating temperature (Orange) Item Explanation Print Settings button You can change settings for the print job.