L-6534VW Operation Guide Overview of the Product Basic Settings Print Operation Settings 41 Item Explanation Print Operation Settings Displays the screen where you can set operations at the time of splice detection in the substrate and performing auto head maintenance. U “Print Operation Settings” on page 41 Print Job Reception Settings Displays the screen for making various press settings. U “Print Job Reception Settings” on page 42 Press Information Displays the screen for checking network settings and operation information for the press. U “Press Information” on page 43 Item Explanation Language Change the display language. Temperature Units Select the unit to display the temperature.
Display Units Select the unit to display the substrate width and thickness. Substrate Length Units Select the unit to display the substrate length. Adjust Auto Print Data Set the auto adjustment function for the printable area. When set to On and the print data exceeds the substrate size, only the printable area is printed. Furthermore, this does not automatically reduce the print size. When set to Off and the print data exceeds the substrate size, an error is generated and printing cannot be performed. Item Explanation Operation when Substrate Joint Detected Sets the function to detect splicing tape over splices in the substrate.
Since splices are not detected when Print over joints is selected, printing is performed over the splices. If splices are detected when Joint and margin are fed and printing resumes is selected, the spliced section and margin are fed and printing restarts automatically. U “Printing on the Substrate Including a Splice” on page 214