L-6534VW Operation Guide Overview of the Product Job Management Screen On the Job Management screen, you can change the print order and change print settings. 57 Item Explanation Distance from Right Edge of Print Job Set the distance from the right edge of the print data to the right edge of the eye mark. Reverse Feeding Position Adjustment Check the print results of reverse feeding for printing, and then set the range between the print data from -100.00 to 100.00 mm (-3.937 to 3.937 inch). Set the value to 0 mm before adjusting. When prints overlap, set a negative value. If the following conditions are the same, you can reuse the adjustment values.
❏ The same substrate model number for the same manufacturer ❏ Substrate width ❏ Distance from the right edge of the print data to the right edge of the eye mark Item Explanation Waiting/Pause/Printed The tabs switch the screen and Print Job Queue for Waiting, Pause, or Printed appears. In the Waiting screen, you can apply a changed preset to a job, change the order of print, and perform grouping. U “Waiting/Pause/Printed Screens” on page 58