L-6534VW Operation Guide Overview of the Product Substrate Specifications 65 Main Press Unit, Additional UV Lamp Curing Unit, Corona Treater Printing method On-demand ink jet Print Speed High productivity printing 50 m/min Standard printing 30 m/min High density printing 15 m/min Reverse white printing 7.6 m/min Printing resolution 50 m/min: 600×600 dpi 30 m/min, 15 m/min, and 7.6 m/min: 600×1200 dpi Maintenance tank 10 L Floor load capacity 520 kg/m2 Do not place the press on materials such as carpet or urethane foam (or any type of resin). Because level adjusters apply point loads, if you are concerned about damaging the floor use a load distribution board.
Temperature and humidity Recommended environment when printing Temperature: 20 to 28˚C Humidity: RH 35 to 55% without condensation Recommended environment when stopped (at night and so on) Temp: Right figure Humidity: Right figure Recommended environment when stopped (at night and so on) Recommended environment when printing Without condensation Altitudes Altitudes 2,000 m or lower Noise During print operations: 78 dB or less Substrate type Adhesive paper, adhesive film, single-layer paper, and single-layer film Check the paper or film first before use.
Substrate width 80 to 340 mm Substrate thickness 80 to 320 μm Maximum roll mass 100 kg Maximum roll diameter 600 mm Maximum roll length 1,000 m