L-6534VW Operation Guide Overview of the Product Variable Printing and Banner Printing Specifications Values Varying Depending on the Print Speed Necessary margin or feeding amount may vary depending on the selected print speed. It also varies when the set value of the tension applied to the substrate is small. Setting value for Preset for Printing See the following tables to set a value appropriate for the print speed. 69 Eye Mark for Reverse Feeding Eye mark for additional printing Eye mark design rules ❏ There are no images other than the eye marks in the feeding direction. There should be one eye mark per page in the feeding direction.
❏ There is a gap (a) of at least 2 mm between the right edge of the print data and the right edge of the eye mark, and a bleed or at least 2 mm on the right of the print data There are no images other than the eye marks in the feeding direction There should be one eye mark per page for print positioning. Necessary leading margin for underlying substrate - The necessary leading margin for the underlying substrate varies depending on the print speed.
U “Positioning eye marks for additional printing” on page 166 Alignment method Reading with the sensors Reading with the sensors Print length The total print length for the print data is 800 m or less Preparation process for variable printing Up to 2 jobs, where the total length of the 2 jobs is less than 1,120 m