L-6534VW Operation Guide Overview of the Product Print Length of a Job When the Reverse Feeding Amount Is Not Secured If printing is paused while using the reverse feeding function, the print length of the job may sometimes be insufficient. In this case, the substrate may be automatically fed to secure the necessary reverse feeding amount. The print length varies depending on the print speed. It also varies depending on whether or not the corona treatment is being used or when the set value of the tension applied to the substrate is small. See the following table for more details. * When the tension value for either one of unwinding or rewinding is 10 N or less External dimensions Unit:
mm Illustration from above 72 Print Speed With normal tension With low tension* Without corona treatment With corona treatment Without corona treatment With corona treatment 50 m/min (Productivity) Less than 19.5 m Less than 20.5 m Less than 23.5 m Less than 26.5 m 30 m/min (Standard) Less than 17.5 m Less than 18.0 m Less than 17.5 m Less than 20.0 m 15 m/min (High density) Less than 15.5 m Less than 17.0 m Less than 15.5 m Less than 17.5 m 7.6 m/min (Reverse White) Less than 15.5 m Less than 16.5 m Less than 15.5 m Less than 17.0 m