L-6534VW Operation Guide Starting and Ending the Press Note: If you are not using the additional UV lamp curing unit, you can continue using the press by switching the breaker for the additional UV lamp curing unit to OFF . C Move the press switch from P to Standby . The press starts and the screen is displayed on the touch panel. c Important: If the press switch is set to the Ready position, the press does not turn on even when the power breaker is turned ON . Switch to Standby . D Perform operations for starting work. (1) Open the top front cover, unwinder roll cover, and the rewinder roll cover on the press.
(2) Operate the levers in 2 positions (a) and (b), and then set nip rollers A and B. 76