INTRODUCTION IN-18 Riveter T-Rivet with of 6.4 mm: Do not place your hands or the wire harness within a radius of 20 mm (0.70 in.) from the rivet, as the rivet is cut and opened in this area. 20 mm (0.79 in.) 20 mm (0.79 in.) Prizing a riveter damages the riveter showing that it is not tightened correctly and bends the mandrel. Riveter Mandrel Loose tightening may result from either tilting the riveter while handling or the riveter not con- necting to the material. Riveter Riveter Loose tightening also occurs when a rivet is ap- plied between materials without touching. Riveter T-Rivet with 6.4 mm:
When a mandrel of a rivet is lost, the rivet should be replaced to prevent loose tighten- ing. Mandrel