Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM0000019ZE000X agn Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - ] Title: BRAKE: HYDRAULIC BRAKE BOOSTER: DISASSEMBLY; 2006 MY Land Cruiser [05/2005 - ] DISASSEMBLY 1. SET HYDRAULIC BRAKE BOOSTER ASSEMBLY (a) Using SST, set the hydraulic brake booster in a vise. SST: 09630-00014 09631-00142 SST: 09950-60010 09951-00180 09951-00190 2. REMOVE FLUID LEVEL WARNING SWITCH CONNECTOR CLAMP (a) Disconnect the connector. (b) Remove the bolt and clamp. 3. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY (a) Remove the reservoir cap. (b) Remove the 3 screws and pull out the reservoir. (c) Remove the 3 grommets. 4.
REMOVE MASTER CYLINDER PUSH ROD CLEVIS (a) Loosen the lock nut, then remove the clevis and lock nut. 5. REMOVE CYLINDER BOOT (a) Remove the cylinder boot. 6. REMOVE NO. 1 BRAKE ACTUATOR TUBE (a) Using SST, remove the actuator tube. SST: 09023-00101 7. REMOVE BRAKE BOOSTER PUMP ASSEMBLY (a) Remove the actuator hose. (b) Remove the 4 screws and wire harness from the booster pump. (c) Remove the 2 bolts and accumulator bracket. (d) Remove the 2 bolts and booster pump. (e) Remove the bolt and No. 1 pump bracket. (f) Remove the 2 washers, 2 cushions, 2 collars and sleeve. (g) Remove the 2 bolts and No. 2 pump bracket. (h) Remove the cushion from the No. 2 pump bracket. 8.
REMOVE OIL PRESSURE SENSOR (a) Using a 30 mm deep socket, remove the oil pressure sensor. 9. REMOVE PISTON cardi