cardiagn.com (d) Turn the ignition switch ON. (e) Turn the tester ON. (f) Enter the following menus: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST. (g) Perform the ACTIVE TEST. ITEM TEST DETAILS DIAGNOSTIC NOTE SHIFT [Test Details] Operate shift solenoid valve and set each shift lever position by yourself [Vehicle Condition] 50 km/h (30 mph) or less [Other information] Press "→" button: Shift up Press "←" button: Shift down Possible to check operation of shift solenoid valves LOCK UP [Test Details] Control shift solenoid SLU to set automatic transmission to the lock-up condition [Vehicle Condition] Throttle valve opening angle: Less than 35% Vehicle speed:
58 km/h (36 mph) or more Possible to check shift solenoid SLU operation LINE PRESS UP * [Test Details] Operate shift solenoid SLT and raise line pressure [Vehicle Condition] Vehicle stopped IDL: ON HINT: OFF: Line pressure up (when Active Test of "LINE PRESS UP" is performed, ECM commands SLT solenoid to turn OFF) ON: No action (normal operation) - HINT: *: "Control the Line Pressure Up" in the ACTIVE TEST is performed to check the line pressure changes by connecting SST to the automatic transmission, which is used in the HYDRAULIC TEST as well. Please note that the pressure values in the ACTIVE TEST and HYDRAULIC TEST are different.