cardiagn.com Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000000XYW00EX Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - ] Title: 2UZ-FE COOLING: RADIATOR: ON-VEHICLE INSPECTION; 2006 MY Land Cruiser [05/2005 - ] ON-VEHICLE INSPECTION 1. CHECK RADIATOR CAP NOTICE: If the radiator cap contains foreign matter, rinse it with water. Before using a radiator cap tester, wet the relief valve and pressure valve with engine coolant or water. When performing the 2 steps below, keep the tester at an angle of 30°or more above horizontal. (a) Slowly pump the radiator cap tester, and then check that air is being released from the vacuum valve. Pump speed:
1 push every 3 seconds or more NOTICE: Push the pump at a constant speed. If air is not being released from the vacuum valve, replace the radiator cap. (b) Pump the tester and measure the relief valve opening pressure. Pump speed: 1 push within 1 second NOTICE: The specified pump speed is for the first pump only. It will close the vacuum valve. Once the vacuum valve is closed, the pump speed can be reduced. Standard opening pressure: 93 to 123 kPa (0.95 to 1.25 kgf/cm 2 , 13.5 to 17.8 psi) Minimum opening pressure: 78 kPa (0.8 kgf/cm 2 , 11.4 psi) HINT: Use the tester's maximum reading as the opening pressure.
If the maximum reading is less than the minimum opening pressure, replace the radiator cap.