Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000001BLH000X agn Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - ] Title: ENGINE HOOD / DOOR: BACK DOOR: DISASSEMBLY; 2006 MY Land Cruiser [05/2005 - ] DISASSEMBLY 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation. 2. REMOVE ASSIST GRIP (a) Using a screwdriver, remove the 2 assist grip plugs. HINT: Tape the screwdriver tip before use. (b) Remove the 2 screws and assist grip. 3. REMOVE BACK DOOR INSIDE HANDLE BEZEL 4.
REMOVE CENTER BACK DOOR GARNISH (a) Using a screwdriver, remove the center back door garnish. HINT: Tape the screwdriver tip before use. 5. REMOVE BACK DOOR GARNISH (a) Using a screwdriver, remove the center back door garnish. HINT: Tape the screwdriver tip before use. 6. REMOVE REAR WIPER ARM (a) Open the cover. (b) Remove the nut and rear wiper arm. Torque: 5.4 N·m {55 kgf·cm, 48in·lbf} (c) Remove the grommet. 7. REMOVE REAR WIPER MOTOR AND LINK ASSEMBLY (a) Disconnect the connector. (b) Remove the 2 bolts. (c) Unfasten the 3 bolts and remove the rear wiper motor and link assembly. cardi