Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM000001A8H002X agn Model Year Start: 2007 Model: Land Cruiser Prod Date Range: [08/2006 - ] Title: AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: ON-VEHICLE INSPECTION; 2007 MY Land Cruiser [08/2006 - ] ON-VEHICLE INSPECTION 1. CHECK STEREO COMPONENT AMPLIFIER CIRCUIT (a) Disconnect the S6 amplifier connector. (b) Measure the resistance of the wire harness side connector. Standard resistance: TESTER CONNECTION SPECIFIED CONDITION S6-12 (E) - Body ground Below 1 Ω S6-13 (GND2) - Body ground Below 1 Ω (c) Measure the voltage of the wire harness side connector. Standard voltage:
TESTER CONNECTION SPECIFIED CONDITION S6-7 (+B) - Body ground 10 to 14 V S6-16 (+B2) - Body ground 10 to 14 V If the results are not as specified, there may be a malfunction on the wire harness side. 2. CHECK STEREO COMPONENT CONTROLLER ASSEMBLY CIRCUIT (a) Disconnect the R39 controller connector. (b) Measure the resistance of the wire harness side connector. Standard resistance: TESTER CONNECTION SPECIFIED CONDITION R39-17 (GND) - Body ground Below 1 Ω (c) Measure the voltage of the wire harness side connector. Standard voltage:
TESTER CONNECTION CONDITION SPECIFIED CONDITION R39-24 (ACC) - Body ground Ignition switch OFF, radio receiver switch ON Below 1 V R39-24 (ACC) - Body ground Ignition switch ACC or ON, radio receiver switch ON 10 to 14 V R39-12 (+B) - Body ground Always 10 to 14 V If the results are not as specified, there may be a malfunction on the wire harness side. 3. CHECK DISC PLAYER CHANGER CIRCUIT (w/ NAVIGATION SYSTEM) (a) Disconnect the D26 changer connector. (b) Measure the resistance of the wire harness side connector. Standard resistance: cardi TESTER CONNECTION SPECIFIED CONDITION D26-20 (GND) - Body ground Below 1 Ω (c) Measure the voltage of the wire harness side connector. Standard voltage:
TESTER CONNECTION CONDITION SPECIFIED CONDITION D26-1 (ACC) - Body ground Ignition switch OFF Below 1 V D26-1 (ACC) - Body ground Ignition switch ACC or ON 10 to 14 V