Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM00000102C00GX agn Model Year Start: 2007 Model: Land Cruiser Prod Date Range: [08/2006 - ] Title: AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: SYSTEM DESCRIPTION; 2007 MY Land Cruiser [08/2006 - ] SYSTEM DESCRIPTION CAUTION: The CD player uses an invisible laser beam which could cause hazardous radiation exposure. Be sure to operate the player as instructed. 1. COMPACT DISC PLAYER (a) The Compact Disc (CD) player uses a laser beam pickup to read the digital signals recorded on CDs and reproduce analog signals of music, etc. The CD player can play 12 cm (4.7 in.) discs. NOTICE: Never disassemble or apply oil to any part the player unit.
Only insert discs into the CD player. 2. MAINTENANCE (a) Tape player / head cleaning: (1) Raise the cassette door with your finger. Using a pencil or similar object, push in the guide. (2) Using a cleaning pen or cotton applicator soaked in cleaner, clean the head surface, pinch rollers and capstans. (b) CD cleaning: (1) If a disc is dirty, clean the disc by wiping the CD's underside radially with a soft cloth. NOTICE: Do not use a conventional record cleaner or anti-static preservative. 3. OUTLINE OF AVC-LAN (a) What is AVC-LAN? AVC-LAN is the abbreviation, which stands for Audio Visual Communication-Local Area Network.
This is a unified standard co-developed by 6 audio manufacturers associated with Toyota Motor Corporation. The Unified standard covers signals, visual signals, signal for switch indication and communication signal. Radio receiver assembly and RSA (Rear Seat Audio) panel have a resistance (60-80 Ω) required for communication. (b) Objectives Recently the car audio system has been rapidly developed and functions have been changed drastically. The conventional system has been switched to the multi-media type such as a navigation system. At the same time, the level of customers needs to audio has been upgraded. This lies behind this standardization. The concrete objectives are explained below.
(1) Step1: When products by different manufacturers were combined together, there used to be a case that malfunction occurred such as sound did not come out. This problem has been resolved by standardization of signals. (2) Step2: Various types of after market products have been able to add or replace freely. (3) Step3: Because of the above step2, each manufacturer has become able to concentrate on developing products in their strongest field. This has enabled many types of products to be provided inexpensively. cardi