(a) Disconnect the connector, and then remove the 5 bolts for bolt B. Torque: 8.0 N·m {82 kgf·cm, 71in·lbf} (b) Loosen the bolt and the window regulator for bolt A. Torque: 8.0 N·m {82 kgf·cm, 71in·lbf} HINT: Remove the regulator through the service hole. At the time of reassembly, apply MP grease to the window regulator. NOTICE: At the time of reassembly, do not apply grease to the spring of the window regulator. 18. REMOVE FRONT DOOR LOCK ASSEMBLY (a) Remove the clip and the door lock link protector. (b) Disconnect the connector. (c) Disconnect the 2 links from the outside handle and door lock cylinder.
(d) Using a "torx" wrench, remove the 3 screws and the door lock through the service hole. "Torx" wrench: Torque: T30 (Part No. 09042-00010 or locally manufactured tool) 5.0 N·m {51 kgf·cm, 44in·lbf} HINT: At the time of reassembly: Apply adhesive to the 3 screws. Adhesive: Part No. 08833-00070, THREE BOND 1324 or equivalent. Remove the protector, and apply MP grease to the sliding and rotating parts of the door lock. 19. REMOVE OUTSIDE HANDLE WITH DOOR LOCK CYLINDER (a) Remove the 2 bolts and outside handle with the door lock cylinder. Torque: cardiagn.com