8. REMOVE REAR WIPER MOTOR RELAY (a) Remove the bolt and rear wiper motor relay. gn 9. REMOVE BACK DOOR WEATHERSTRIP (a) Remove the back door weatherstrip. NOTICE: Do not pull strongly on the weatherstrip as it may tear. 10. REMOVE BACK DOOR INSIDE HANDLE (a) Remove the 2 bolts. (b) Disconnect the back door lock locking rod and back door lock inside opening link, and then remove the back door inside handle. 11. REMOVE BACK DOOR LOCK CONTROL ASSEMBLY (a) Disconnect the links. (b) Remove the 3 bolts. Torque: 5.0 N·m {51 kgf·cm, 44in·lbf} (c) Disconnect the connector, and then remove the back door control. HINT: At the time of reassembly, please refer to the following item.
Apply MP grease to the sliding surface of the back door control. 12. REMOVE BACK DOOR OUTSIDE HANDLE (a) Using a screw driver, remove the back door outside handle. HINT: Tape the screwdriver tip before use. cardia