Chapter 3 Software Operation 3.2 Position Reading and Set the Zero Value ◎ Position Reading Providing users to read absolute position, zero position, relative position, max value, min value. In addition, you can also set the zero value and reset value here. Absolute Position: the distance between sensors and measured objects Homing Position: the distance between sensors and the homing point. Relative position: the distance between absolute position and relative position. Max: maximum relative position Min: minimum relative position Homing: Set the current measured distance as the default, and the value is displayed as 0 Reset value:
reset the homing position to the initial value (initial values may differ based on different models) (LD-040 40000um; LD-080 80000um; LD-150 150000um) Laser Displacement Operating Manual 3-2