2. System Function 2. Introduction to System Function DVP10MC11T is a high-performance controller in charge of 1~ 16 real axes and max. 18 virtual axes with the application functions like gear box, cam, rotary cut, flying shear. With a standard PLC module inside it, DVP10MC11T supports the functions of PLC and can be extended with the DeviceNet module, CANopen module, Ethernet module, high-speed analog-quantity module on its left side and all Slim series of modules with analog quantity and digital quantity on its right side.
In addition, DVP10MC11T provides the standard RS232, RS485 communication port, CANopen bus interface, Ethernet interface, encoder interface so that user could handily construct a motion control network with powerful functions. 2.1. System Architecture DVP10MC11T can be applied to the construction of a multi-layer industrial network. In the following figure, the top layer is the network constituted by Ethernet, the middle layer is the network made up of CAN bus supporting DeviceNet and CANopen protocol, the bottom layer is the network consisting of 485 bus supporting Modbus.
DVPCOPM-SL DVPDNET-SL DVPEN01-SL DVP10MC11T Extend I/O The figure above displays the external equipment connected to each port of DVP10MC11T. The following sections will introduce the functions of each communication port. DVP-MC operating manual 2-1 1: RS232 3:Enthernet 2:RS485 2:RS485 4:CAN 6:DeviceNet/CANopen 5:Encoder 3:Enthernet 2:RS485