INTRODUCTION - Rivet Removal and Installation IN-17 Hand Riveter RIVET INSTALLATION 1. RIVET INSTALLATION (1) Apply touch-up paint at the area. (2) Select an installation tool. Nose Piece Air Riveter (P/N 09050-20010) Nose Piece (3) Select the smallest a nose piece possible for a rivets mandrel. Nose Piece NOTE: Wrong selection of a nose piece may cause the rivet- er to be damaged or bad tightening. Nose piece of Air Riveter (4) Insert the nose piece to the riveter and then the mandrel of the new rivet into the nose piece. (5) Vertically insert the rivet into a hole and keep place it strongly. NOTE:
If the tip of the rivet is not deformed or the mandrel is not cut, repeat process (5) again. LX470 18 Item Installation tool Aluminum-Rivet Waterproof-Rivet with ø4.8 mm Hand Riveter or Air Riveter Steel-Rivet T-Rivet with ø6.4 mm Air Riveter Parts Name Parts Number Color Rivet type Nose piece No. 1 09050 -02020 Silver ø4.0 mm Aluminum ø4.0 mm Steel ø4.8 mm Waterproof Nose piece No. 2 09050 -02030 Copper ø4.8 mm Aluminum ø4.8 mm Steel Nose piece No. 3 09050 -02040 Black ø6.4 mm T-Rivet Nose piece No. 4 09050 -02050 Black ø4.0 mm Waterproof Special