− MAINTENANCE CHASSIS MA−9 (b) Differential: Remove the filler plug and feel inside the hole with your finger. Check that the oil comes to within 5 mm (0.20 in.) of the bottom edge of the hole. If the level is low, add oil until it begins to run out of the filler hole. Front differential oil: See page SA−32 Rear differential oil: See page SA−92 8. Canada: REPLACE AUTOMATIC TRANSMISSION FLUID (See page DI−3 ) 9. Canada: REPLACE TRANSFER AND DIFFERENTIAL OIL (a) Remove the drain plug and drain the oil. (b) Reinstall the drain plug securely. (c) Add new oil until it begins to run out of the filler hole. Transfer oil: See page TR−6 Front differential oil:
See page SA−32 P22573 Drain Plug B04570 Rear differential oil: See page SA−92 10. REPLACE ACTIVE HEIGHT CONTROL SYSTEM FLUID (See page SA−183 ) 11. INSPECT ACTIVE HEIGHT CONTROL SUSPENSION ACCUMULATOR (See page SA−205 ) 12. REPACK FRONT WHEEL BEARINGS AND DRIVE SHAFT BUSHING GREASE (a) Change the front wheel bearing grease (See page SA−14 ). NOTICE: Maintenance free for rear wheel bearing. (b) Repack the drive shaft bushing grease (See page SA−30 ). 13. LUBRICATE PROPELLER SHAFT AND TIGHTEN BOLTS (a) Lubricate chassis components, referring to the lubrication chart. Before pumping in grease, wipe off any mud and dust on the grease fitting.
P22574 Drain Plug 2000 LEXUS LX470 (RM745U) 55 Author : Date: