INTRODUCTION - Rivet Removal and Installation IN-18 T-Rivet with ш6.4 mm: Do not place your hands or the wire harness within a radius of 20 mm (0.70 in.) from the rivet, as the rivet is cut and opened in this area. Riveter 20 mm (0.79 in.) 20 mm (0.79 in.) Prizing a riveter damages the riveter showing that it is not tightened correctly and bends the mandrel. Riveter Mandrel Loose tightening may result from either tilting the riveter while handling or the riveter not connecting to the materi- al. Riveter Riveter Loose tightening also occurs when a rivet is applied be- tween materials without touching. Riveter T-Rivet with ш6.4 mm:
When a mandrel of a rivet is lost, the rivet should be re- placed to prevent loose tightening. Mandrel LX470