C TROUBLESHOOTING Push the terminal retainer down to the temporary lock position. Retainer at Full Lock Position Retainer at Temporary Lock Position [ Male ] [ Female ] (c) Release the locking lug from terminal and pull the terminal out from rear. Locking Lug Tool 4. INSTALL TERMINAL TO CONNECTOR (a) Insert the terminal. HINT: 1. Make sure the terminal is positioned correctly. 2. Insert the terminal until the locking lug locks firmly. 3. Insert the terminal with terminal retainer in the temporary lock position. (b) Push the secondary locking device or terminal retainer in to the full lock position. 5. CONNECT CONNECTOR