ENGINE — 2UZ-FE ENGINE 35 4. Cylinder Block The cylinder block is made of cast iron. The cylinder block has a bank angle of 90 ° , a bank offset of 21 mm (0.827 in.) and a bore pitch of 105.5 mm (4.15 in.), resulting in a compact block in its length and width even for its displacement. Part of the volute chamber of the water pump is incorporated into the cylinder block to shorten the engine length. Installation bosses of the two knock sensors are located on the inner side of left and right banks. The plastic region tightening bolts are used, for the crankshaft bearing caps. The starter is located inside the V-bank.
Bank Angle 90 ° Starter Fitting Volute Chamber Bore Pitch 105.5 mm (4.15 in.) 156EG36