Last Modified: 4-30-2014 6.6 N Doc ID: RM000001ADP001X agn Model Year: 2006 Model: LX470 Prod Date Range: [05/2005 - ] Title: SUSPENSION: FRONT WHEEL ALIGNMENT: ADJUSTMENT; 2006 MY LX470 [05/2005 - ] ADJUSTMENT 1. INSPECT VEHICLE HEIGHT Standard vehicle height: FRONT (A - B): REAR (C - D): 82.7mm (3.256 in.) 71.2 mm (2.803 in.) Measuring points: A: Ground clearance of spindle center B: Ground clearance of lower suspension arm front bolt center C: Ground clearance of rear axle shaft center D: Ground clearance of lower control arm front bolt center NOTICE: Before inspecting the wheel alignment, adjust the vehicle height to the specified value.
If the vehicle height is not the specified value, try to adjust it by pushing down on or lifting the body. 2. INSTALL CAMBER-CASTER-KINGPIN GAUGE OR POSITION VEHICLE ON WHEEL ALIGNMENT TESTER (a) Follow the specific instructions of the equipment manufacturer. 3. INSPECT CAMBER, CASTER AND STEERING AXIS INCLINATION Standard camber, caster and steering axis inclination:
ITEM SPECIFIED CONDITION Camber Right-left error 0°00' +- 45' (0.00° +- 0.75°) 30' (0.5°) or less Caster Right-left error 3°05' +- 45' (3.08° +- 0.75°) 30' (0.5°) or less Steering axis inclination Right-left error 12°15' +- 45' (12.25° +- 0.75°) 30' (0.5°) or less If the steering axis inclination is not within the specified value, after the camber and caster have been correctly adjusted, recheck the steering knuckle and front wheel for wearing or looseness. 4. INSPECT TOE-IN Toe-in (total): A + B 0°00' +- 12' (0°+- 0.2°) C - D 0 +- 2 mm (0 +- 0.08 in.) If the toe-in is not within the specification, adjust the rack ends. 5. ADJUST CAMBER AND CASTER NOTICE:
After the camber has been adjusted, inspect the toe-in. (a) Loosen the front and/or rear adjusting cam nuts. (b) Adjust the camber and caster using front and/or rear adjusting cams. cardi