Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM0000018ZB00AX agn Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 - ] Title: A750F AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISSION ASSEMBLY: INSTALLATION; 2007 MY LX470 [08/2006 - ] INSTALLATION 1. INSPECT TORQUE CONVERTER CLUTCH ASSEMBLY (a) Inspect the torque converter clutch assembly . 2. INSTALL TORQUE CONVERTER CLUTCH ASSEMBLY (a) Install the torque converter clutch to the automatic transmission. (b) Using a vernier caliper and straightedge, measure the dimension A between the transmission and the end surface of the drive plate. Standard dimension:
A = 22.28 mm (0.8772 in.) (c) Using a vernier caliper and a straightedge, measure the distance from the installed surface of the transmission housing to the installed surface of the torque converter clutch. Correct distance: More than 17.1 mm (0.673 in.) 3. INSTALL TRANSFER ASSEMBLY (a) Install the transfer assembly . 4. INSTALL WIRE HARNESS AND HOSE (a) Connect the 5 hoses and install the wire harness and hose. (b) Install the 6 connector clamps. (c) Connect the 5 connectors. (d) Attach the lock and connect the connector. (e) Install the 4 bolts. Torque: 8.0 N·m {82 kgf·cm, 71in·lbf} 5. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY (a) Install the transmission unit with the 10 bolts. Torque:
71 N·m {724 kgf·cm, 52ft·lbf} for bolt A 37 N·m {377 kgf·cm, 27ft·lbf} for bolt B (b) Install the transmission wire clamp bolt. 6. INSTALL ENGINE MOUNTING INSULATOR REAR cardi