Руководство по ремонту подвески Lexus LX470 (EN)

REPLACEMENT

cardiagn.com Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM000001AE8005X Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 - ] Title: SUSPENSION: FRONT LOWER SUSPENSION ARM: COMPONENTS; 2007 MY LX470 [08/2006 - ] COMPONENTS ILLUSTRATION

Стр. 1

REPLACEMENT

cardiagn.com Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM000001AE7004X Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 - ] Title: SUSPENSION: FRONT LOWER SUSPENSION ARM: INSPECTION; 2007 MY LX470 [08/2006 - ] INSPECTION 1. INSPECT FRONT SUSPENSION LOWER ARM ASSEMBLY (a) As shown in the illustration, flip the ball joint stud back and forth 5 times, before installing the nut. (b) Using a torque wrench, turn the nut continuously one turn per 3 to 5 seconds and take the torque reading on the 5th turn. Torque: Standard turning torque - 0.29 to 2.94 N·m {3 to 30 kgf·cm, 2.6 to 26in·lbf}

Стр. 2

REPLACEMENT

cardiagn.com Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM000001AE5005X Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 - ] Title: SUSPENSION: FRONT LOWER SUSPENSION ARM: INSTALLATION; 2007 MY LX470 [08/2006 - ] INSTALLATION Installation is in the reverse order of removal . HINT: After installation, check the front wheel alignment .

Стр. 3

REPLACEMENT

cardiagn.com Last Modified: 7-3-2017 6.8:8.0.40 Doc ID: RM000001AE9005X Model Year Start: 2007 Model: LX470 Prod Date Range: [08/2006 - ] Title: SUSPENSION: FRONT LOWER SUSPENSION ARM: REMOVAL; 2007 MY LX470 [08/2006 - ] REMOVAL 1. REMOVE FRONT WHEEL Torque: 131 N·m {1,340 kgf·cm, 97ft·lbf} 2. REMOVE ENGINE UNDER COVER 3. REMOVE TORSION BAR SPRING (a) Remove the torsion bar spring . 4. DISCONNECT FRONT STABILIZER LINK ASSEMBLY (a) Remove the bolt and disconnect the stabilizer bar link from the lower suspension arm. Torque: 52 N·m {530 kgf·cm, 38ft·lbf} 5. DISCONNECT FRONT SHOCK ABSORBER ASSEMBLY (a) Remove the nut and bolt, and disconnect the shock absorber from the lower suspension arm.

Torque: 135 N·m {1,400 kgf·cm, 100ft·lbf} 6. DISCONNECT STEERING KNUCKLE (a) Remove the cotter pin and nut. Torque: 159 N·m {1,625 kgf·cm, 117ft·lbf} (b) Using SST, disconnect the steering knuckle from the lower suspension arm. SST: 09628-62011 7. REMOVE FRONT SUSPENSION LOWER ARM ASSEMBLY (a) Remove the 2 nuts, 3 bolts and lower suspension arm. Torque: 167 N·m {1,702 kgf·cm, 123ft·lbf}

Стр. 4