IN−14 − INTRODUCTION FOR ALL OF VEHICLES (f) SEAT BELT PRETENSIONER (1) Never measure the resistance of the seat belt pre- tensioner. (This may cause the seat belt pretension- er to activation, which is very dangerous.) (2) Never disassemble the seat belt pretensioner. (3) Never install the seat belt pretensioner in another vehicle. (4) Store the seat belt pretensioner where the ambient temperature remains below 80 ° C (176 ° F) and away from electrical noise without high humidity. (5) When using electric welding, first disconnect the connector (yellow color and 2 pins) before starting work.
(6) When disposing of a vehicle or the seat belt preten- sioner alone, the seat belt pretensioner should be activated before disposal (See page BO−152 ). Per- form the operation in a safe place away from electri- cal noise. (7) The seat belt pretensioner is hot after activation, so let it cool down sufficiently before the disposal. However never apply water to the seat belt preten- sioner. Example: B04210 14 Author : Date: