− MAINTENANCE BRAKE MA−7 BRAKE INSPECTION 1. INSPECT BRAKE LINE PIPES AND HOSES HINT: Check in a well lighted area. Check the entire circumference and length of the brake hoses using a mirror as required. Turn the front wheels fully right or left before checking the front brake. (a) Check all brake lines and hoses for: Damage Wear Deformation Cracks Corrosion Leaks Bends Twists (b) Check all clamps for tightness and connections for leak- age. (c) Check that the hoses and lines are clear of sharp edges, moving parts and the exhaust system. (d) Check that the lines installed in grommets pass through the center of the grommets. 2.
INSPECT FRONT AND REAR BRAKE PADS AND DISCS (FRONT PADS: See page BR−13 ) (REAR PADS: See page BR−22 ) (FRONT DISCS: See page BR−18 ) (REAR DISCS: See page BR−27 ) 3. INSPECT PARKING BRAKE LININGS AND DRUMS (See page BR−33 ) 4. INSPECT OR CHANGE BRAKE FLUID (a) Visually inspect the master cylinder for leaks. (b) Change brake fluid. (See page BR−4 ) Fluid: SAE J1703 or FMVSS No.116 DOT3 MA031−01 MA0055 52 Author : Date: