Electrical specifications Table 1-3 lists the electrical specifications required to run the printer safely. Table 1-3 Electrical specifications * When the printer is in standby mode, it continues to consume a minimal amount of energy. Note This information is preliminary and might not be current. Please see http://www.hp.com/support/ lj4600 for current information. Environmental specifications Keep the printer within the environmental conditions shown in Table 1-4 for optimum performance.
Table 1-4 Environmental specifications 24 Site requirements C9660-90901 Item 110-volt models 220-volt models Power requirements 100-127 V (-10%, +6%) 50/60 Hz (+/- 2 Hz) 220-240 V (-10%, +6%) 50/60 Hz (+/- 2 Hz) Power consumption (LaserJet 4600) During printing During standby* During PowerSave Off 426 W 34 W 30 W 0 W 430 W 36 W 32 W 0 W Minimum recommended circuit capacity for typical product 6 A 3 A Item Operating Temperature Recommended Allowed 17° to 25° C (63° to 77° F) 10° to 30° C (50° to 86° F) Humidity Recommended Allowed 30% to 70% RH 10% to 80% RH Altitude Allowed 0 to 2600 m (0 to 8530 ft)