CENTER DISPLAY Note! ■ DAY MODE: To set the day mode. □ Each time the multimedia host is started, the vehicle hotspot function is off by default. □ When the vehicle hotspot is on, you can change the name and password of the vehicle hotspot. If the password of the vehicle hotspot is empty, the vehicle hotspot is not encrypted. □ When the vehicle hotspot is on, the central display shows a list of devices currently connected. □ When the vehicle hotspot is on, you can set the number of devices that can be connected to the vehicle hotspot. Up to 8 devices can be connected at the same time.
VESPER Sound click on the navigation bar ， enter the application interface ， click system settings-sound ， The following settings can be done in the sound menu: ■ Equalizer: Set the sound output mode of playing music. ■ Balance and fader: Adjust the sound focus. ■ Volume Adjustment : adjust the volume of navigation/system /voice assistant prompt, media volume and call volume. ■ Touch Tone Sound : turn on/off the touch tone. The touch tone is turned on by default. ■ Climate Key Tone : turn on/off the climate key tone. ■ Vehicle Speed Compensation : when this function is turned on, the volume of entertainment system is adjusted according to the vehicle speed.
You can set four status of OFF, LOW, MID and HIGH, and the default is MID. ■ Sound Mixing Way : set the sound mixing mode to direct mixing or automatic mixing. Real-name authentication Enter the real-name authentication interface. Display click on the navigation bar ， enter the application interface ， click system settings-display ， The following settings can be done in the display menu: System The following can be set in the system menu: ■ Central Control Brightness Adjustment : adjust the brightness of the center display. ■ Linkage of Instrument Panel With Driving Mode : With this function enabled, the display mode of instrument cluster will change with driving mode.
■ Driving Entertainment Restriction : With this function enabled, video play is prohibited when the speed exceeds to a certain value. ■ Software Update: to update the software. ■ Storage space : The usage of storage space is displayed. ■ About the host : The basic information of the host version is displayed. ■ Factory Defaults: This function is used to reset the system to the factory defaults. 100