INTERIOR COMPONENT Reversing lights Electric adjustment of headlight height When the gear lever is in position R, the reversing lights will be illuminated. VESPER Home safety lights After the car is locked, some exterior lights can remain on for a period of time to provide lighting for you. You can enable the home safety lights as follows: 1 The vehicle is switched off. 2Rotate the thumb wheel to 0 position, then to other positions after a few seconds, and immediately turn it back to 0 again. 3Get off the vehicle and lock the doors.
You can set the lighting time of the home safety lights or disable this function through the vehicle setting interface in the center display , please refer to the (p. ) . When there are people in the rear seat or the trunk is loaded, the headlight beam may raise. Turn the thumbwheel down to level the lights to a normal height. Lights for car searching Auto on/off, front headlamp Press the lock button on the remote control key twice , the turn signal lights will flash and the horn will sound. The front headlight auto activating/deactivating function monitors the light intensity of the external environment via the solar sensor.
This function activates the low beam and position lights automatically when it is dark and deactivate all the lights when light is sufficient. Cornering assist function of front fog lights The front fog lights also work as cornering lights that temporarily illuminate an area on the vehicle ’ s side when low/high beam is activated or the steering wheel angle exceeds a certain degree. 121