INTERIOR COMPONENT Caution! ■ Before using the front windshield wipers, ice and snow should be removed from the windshield. Be sure the wiper blades are not frozen in place. ■ The windshield should be thoroughly wet when the front windshield wipers are in operation. Otherwise, damage can occur to the front windshield wiper and the windshield. ■ Check the blades regularly. Neglected maintenance can shorten the service life of the wiper blades. ■ When the windshield is in a dry state, try to avoid using the front windshield wiper, otherwise it will scratch the glass and affect the service life of the wiper blade.
■ If there is dust or leaves on the windshield, please clean it before using the windshield wiper, otherwise it will scratch the glass and affect the service life of the wiper blade. VESPER Rotate the thumbwheel on the end of the stalk up to increase the sensitivity or down to reduce the sensitivity. Adjust the wiping speed by rotating the thumbwheel on the end of the stalk Front windshield wiper with rain sensor (if equipped) Deactivating the auto wiping The vehicle equipped with rain & light sensor can automatically start the front windshield wipers depending on the intensity of the rainfall and adjust the wiping speed. The rain and light sensor is located in the windscreen.
Move the wiper stalk to another wiping position (continuous wiping or 0 position). Caution! ■ Do not use the auto wiping function if there is any danger that the fluid will freeze on the windshield, otherwise your sight may be blocked. ■ Deactivate the auto wiping function before activating the wiper blade service position or using an automatic car wash. Otherwise, damage could be caused by unexpected activation of front windshield wiper. 130