STARTING AND DRIVING Warning! Note! Please strictly follow the precautions mentioned below to avoid accidents. ■ Before starting the vehicle, check that the seat, steering wheel and outside rearview mirrors are in a safe and comfortable position. ■ Before starting the vehicle, check whether the brake pedal can be depressed fully. ■ Start the vehicle according to local environmental laws and regulations. ■ Check whether the surrounding environment meets the conditions for starting the vehicle, and do not start the vehicle if not. ■ Do not start the vehicle with combustible materials under it, otherwise it may catch fire due to contact with high temperature exhaust parts.
■ If the engine has not reached the working temperature, high speed and full throttle of the engine should be avoided, otherwise it may damage the engine. ■ Never remove the remote control key from the vehicle or operate the START/STOP ENGINE button while the vehicle is moving. This may switch off the engine. ■ The exhaust system or engine parts may be too hot. If there are any inflammables nearby, these high temperature parts may cause fire. Please check regularly before driving to ensure that no inflammable foreign matter enters the engine compartment or the exhaust system. VESPER The engine can only be started if a correctly coded remote control key is detected in the car.
2Shift the gear lever to P position. 3Press down the brake pedal fully. 4Press the START/STOP ENGINE button and release to start the vehicle . Note! The pictures are only for illustration, please refer to the actual vehicle. Remote start (if equipped) Start the vehicle via the START/STOP ENGINE button Vehicle with engine remote start system You can use the Lynk & Co app to start the vehicle remotely. 1 Carry the remote control control key into the car. 159