STARTING AND DRIVING Note! Symbols/messages for the lane assist system □ Lane keeping assistance may not work when driving on sharp bends or narrow roads. □ When the steering indicator is turned on or the brake pedal is pressed when the vehicle is running normally, the Lane Assist System (LDW, LDP) will not warn or intervene. □ Lane Assist system may be restricted or unavailable when the body stability control system is in fault, off state or intervenes the vehicle. VESPER No lane lines are detected. Lane line is detected, but the function is limited. You can set the lane assist system via the vehicle setting interface on the center display.
Setting the lane assist system ■ The vehicle setting interface allows you to activate/deactivate the system. ■ Select auxiliary mode and alarm feedback mode in vehicle setting interface. ■ Turn on / off emergency lane keeping assistance in the vehicle setting interface Lane lines are detected and the lane assist system is in standby (which only appears in auxiliary weak and alarm mode). Note! Lane lines are prompted in advance. LKA can only be activated when the vehicle speed exceeds 60 km/h. The lane assist system is interfering with the vehicle. 202