Lynk & Co — Basic troubleshooting guidelines

MAINTENANCE AND SERVICE ■ Care the vehicle regularly in accordance with the intervals specified in the Warranty and Service Manual. ■ Be sure to dispose of engine oil properly. VESPER Caution! ■ Never use inferior motor oil that is not certified by Lynk & Co., as this may lead to engine malfunction or damage. Damage or malfunctions caused by poor oil that not certified by Lynk & Co or by mixing additives which not certified by Lynk & Co are not covered by the Lynk & Co warranty. ■ Not checking the oil level regularly can result in serious engine damage if the oil level becomes too low. Note! 2Remove the dipstick from engine compartment and wipe it clean.

If you need to change engine oil/replace oil filter, go to a Lynk & Co Center. Warning! Do not touch the oil dipstick body with your hand, or you may be severely scalded. Checking engine oil 3Reinsert the dipstick all the way in, then pull it out and check the oil level. The oil level must be between the MIN and MAX marks. Before checking the engine oil level, park the vehicle on a level surface and wait for at least 15 minutes (for the oil to flow back to the oil pan) after the engine is shut down if the engine is warm. If you read the oil level immediately after the engine is shut down, you will not be able to get an accurate oil level reading.

Please use the oil dipstick to check the engine oil level. 1 Remove the engine compartment oil dipstick cover. 254