Lynx Smart BMS 10.
Technical specifications Page 38 Technical specifications Power Lynx Smart BMS 500A Lynx Smart BMS 1000A Supply voltage range 9 – 60Vdc Supported system voltages 12, 24 or 48V Reverse polarity protection No Main safety contactor continuous current rating 500A continuous 1000A continuous Main safety contactor peak current rating 600A for 5 minutes 1200A for 5 minutes Power consumption OFF mode 0.3mA for all system voltages Power consumption in Standby mode Approximately 0.6W (50mA at 12V) Power consumption in ON mode Approximately 2.6W (217mA at 12V) depending on the state of the relays Approximately 4.2W (350mA at 12V) depending on the state of the relays Minimum load resistance for pre- charging 10Ω and above for 12V systems 20Ω and above for 24V and 48V systems AUX output maximum current rating 1.1A continuous, protected by resettable fuse Allow-to-charge port maximum current rating 0.5A at 60Vdc, protected by resettable fuse Allow-to-discharge port maximum current rating 0.5A at 60Vdc, protected by resettable fuse Programmable relay (SPDT) maximum current rating 2A at 60Vdc Connections Lynx Smart BMS 500A Lynx Smart BMS 1000A Busbar M10 (Torque:
33 Nm) 1) M10 (Torque:
33 Nm) (14Nm for units with a serial number before HQ2340XXXX) VE.Can RJ45 and RJ45 terminator I/O Removable multi-connector with screw terminals Battery BMS cables Male and female circular 3-pole connector with M8 screw ring Up to 20 batteries can be connected to the BMS by daisy chaining them Lynx Distributor (up to 4 modules) RJ10 (cable ships with each Lynx Distributor) Physical Lynx Smart BMS 500A Lynx Smart BMS 1000A Enclosure material ABS Enclosure dimensions (h x w x d) 190 x 180 x 80mm 230 x 180 x 100mm Unit weight 1.9 kg 2.7 kg Busbar material Tinned copper Busbar dimensions (h x w) 8 x 30mm Environmental Lynx Smart BMS 500A Lynx Smart BMS 1000A Operating temperature range -40°C to +60° Storage temperature range -40°C to +60° Humidity Max.
95% (non-condensing) Protection class IP22