EPSON — Loading Paper and Envelopes

User’s Guide Paper and Media Handling Note: ❏ Fan and align the edges of the paper before loading. ❏ The printable side is often whiter than the other side. ❏ Always load paper into the rear paper feed short edge first, even when you are printing landscape -oriented pictures. ❏ You can use the following sizes of paper with binding holes: A4, A5, A6, Legal, Letter. Load only 1 sheet of paper at a time. ❏ When loading envelopes, load the short edge first with the flap facing down. ❏ Do not use envelopes that are curled, folded, or glued or that have plastic windows. ❏ Flatten the envelope and the flaps before loading. ❏ Flatten the leading edge of the envelope before loading.

❏ Avoid using envelopes that are too thin, as they may curl during printing. D Slide the edge guide against the left edge of the paper, but not too tightly. Note: For plain paper, do not load paper above the H arrow mark inside the edge guide. For Epson special media, make sure the number of sheets is less than the limit specified for the media. & “Selecting Paper” on page 13 16