User’s Guide Maintaining Your Product and Software Transporting the Product If you move the product some distance, you need to prepare it for transportation in its original box or one of a similar size. c Important: ❏ When storing or transporting the product, avoid tilting it, placing it vertically, or turning it upside down; otherwise ink may leak. ❏ When storing or transporting the ink bottle after opening the sealed bottle, avoid temperature changes, impacts, shaking or tilting the bottle; otherwise ink may leak even if you tighten the cap on the bottle.
Be sure to keep the ink bottle upright when tightening the cap, and take measures to prevent ink from leaking when you transport the bottle. A Remove all paper from the rear paper feed and make sure the product is off. B Close the paper support and the output tray. C Open the printer cover and make sure the print head is in the home position on the right. Note: If the print head is not in the home position on the right, turn on the product and wait until the print head locks in the far right position. Then turn off the product. D Unplug the power cord from the outlet, then disconnect all cables from the product. 43