EPSON — Restrictions on Copying

User’s Guide Important Instructions ❏ Be careful not to trap your fingers when closing the scanner unit. ❏ If the ink level is below the lower limit on the ink tank, refill the ink soon. Continued use of the product when the ink level is below the lower limit on the tank could damage the product. ❏ If you are not going to use the product for a long period, be sure to unplug the power cord from the electrical outlet. ❏ Do not press too hard on the scanner glass when placing the originals. ❏ During the life of your product it may be necessary to replace the waste ink pad when it has become full.

Whether and how often this is required will vary according to the number of pages you print, the type of material that you print and the number of cleaning cycles that the product performs. Epson Status Monitor, your LCD, or lights on the control panel will advise you when this part needs replacing. The need for replacement of the pad does not mean that your product has ceased to operate in accordance with its specifications. The replacement of this part is a routine product servicing activity within the product’s specification and is not a problem which requires repair. The Epson warranty does not therefore cover the cost of this replacement.

If your product needs the pad replacing this can be performed for you by any authorised Epson service provider. It is not a user-serviceable part. Using the product with a wireless connection Note: The availability of this feature varies by product. ❏ Do not use this product inside medical facilities or near medical equipment. Radio waves from this product may adversely affect the operation of electrical medical equipment. ❏ Do not use this product near automatically controlled devices such as automatic doors or fire alarms. Radio waves from this product may adversely affect these devices, and could lead to accidents due to malfunction.

Using the LCD screen ❏ The LCD screen may contain a few small bright or dark spots, and because of its features it may have an uneven brightness. These are normal and do not indicate that it is damaged in any way. ❏ Only use a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers. ❏ The exterior cover of the LCD screen could break if it receives a heavy impact. Contact your dealer if the panel surface chips or cracks, and do not touch or attempt to remove the broken pieces. Handling ink & “Refilling Ink” on page 61 Restrictions on Copying Observe the following restrictions in order to ensure the responsible and legal use of the product. 11