What to Do Next After you have issued the copy EXEC command, you may be prompted for additional information or for confirmation of the action. The prompt displayed depends on how much information you provide in the copy command and the current setting of the file prompt global configuration command. Copying a Configuration File from an RCP Server to Flash Memory Devices To copy a configuration file from an RCP server to a flash memory device, complete the tasks in this section: Procedure Managing Configuration Files What to Do Next Command or Action Purpose Example: Device> enable • Enter your password if prompted. Step 2 configure terminal Example:
Device# configure terminal (Optional) Enters global configuration mode. This step is required only if you override the default remote username or password (see Steps 3 and 4). Step 3 ip ftp username username Example: Device(config)# ip ftp username Admin01 (Optional) Specifies the remote username. Step 4 ip ftp password password Example: Device(config)# ip ftp password adminpassword (Optional) Specifies the remote password. Step 5 end Example: Device(config)# end (Optional) Exits configuration mode. This step is required only if you override the default remote username (see Steps 3 and 4). Step 6 copy ftp: [[//location]/directory ]/bundle name _ flash: Example:
Device>copy ftp:/cat9k iosxe.16.11.01.SPA.bin flash: _ Copies the configuration file from a network server to the flash memory device using FTP. Command or Action Purpose Step 1 enable Enables privileged EXEC mode. Managing Configuration Files 26