Subsequent radiator fan operation time may be conditioned by: Memory “ As of fuelling up ” Display and storage of the collected driving and consumption data. The memory is deleted after fuelling up and the vehicle starts moving. – Active brake cooling after downhill driving. – Engine heat dissipation after high load (e.g. towing a trailer). “ Long-term ” Memory The memory collects the driving data for up to 19 hours and 59 minutes or 99 hours and 59 mi- nutes of travel time or 1999.9 km or 9999.9 km of driven distance. When one of these maximum marks 1) is surpassed, the memory is deleted.
WARNING There may be ice layers on roads and bridges even if the exterior temperature is above freez- ing temperature. ● There may be ice layers on roads even if the exterior temperature is above +4°C and the “snowflake symbol” is not indicated on the display. Manually deleting the travel data memory – Select the memory that you wish to delete. ● Never consider only the exterior temperature indicator! – Press and hold in the window wiper lev- er or in the multifunction steering wheel for approximately two seconds.
Travel data display (multifunction display) Selecting indicators According to the vehicle and radio version, the possible trip data indicators to be displayed on the instrument cluster can be set in the radio system by way of the button OR through the settings button . Simply touch the function button Car → page 28. Please refer to at the start of the chapter on page 15. The travel data indicator (multifunction display) displays the several different driving and con- sumption data and is equipped with 3 memories. Indicator “ Fuel range ” The estimated distance in km that may be travel- led with the amount of fuel in the tank, under the current driving style.
Switching between displays – Vehicles without multifunction steering wheel: press the switch on the windscreen wiper lever → page 27. “ Average consumption ” Indicator The average consumption in km/l is shown after a distance of 300 meters, after switching on the ignition. The display will show dashes up to this point. Displayed values are updated every 5 sec- onds. – Vehicles with multifunction steering wheel: press the or button → page 28. Toggle between the memories With the ignition turned on and the memory dis- played, press the button on the wiper lev- er or the button on the multifunction steering wheel.
“ Consumption ” Indicator The current fuel consumption is displayed in km/l when the vehicle is motion with running engine. The current value is calculated in 30 meter inter- vals and updated approximately every second. Memory “ As of travel start ” Display and storage of the driving and consump- tion data collected from turning the ignition on to turning it off. When driving is interrupted for over 2 hours, the memory is automatically de- leted after resuming driving. “ Oil temperature ” Indicator The engine oil temperature display may not be available on the instrument cluster display ac- cording to the vehicle version. Current engine oil temperature as digital indica- tor.
1) According to the instrument cluster version. Owner's Manual 22