FLENDER Standard Couplings Fluid Couplings — FLUDEX Series © Siemens AG 2015 FLUDEX coupling as aid to starting IEC motors ■ Selection and ordering data Speed n = 1500 rpm This assignment offers safety in normal load cases and includes standard types with 140 °C fusible safety plugs, for horizontal fitting and an ambient air temperature from -40 °C to +40 °C. Type FAD Type FAR V-belt pulley Part 2 Output ШD3 = N-EUPEX size ШD1 ШDA ШD1 ШD2 ШDA G_MD10_EN_00121a NL2 S L1 LG L1 LG 13 1) If the recommended number of belts is ..X, raw-edged belts are required. 2) Larger bores on the output side are possible with type FAE.
13/12 Siemens MD 10.1 · 2015 Three-phase motor FL UDEX Type FAR (with V-belt pulley) Type FAD (with N-EUPEX D add-on coupling) Size PM Siz D1 x L1 e Oil filling DA Pro- file, pitch Ø No. of R grooves m n b ecom- ended o. of elts 1) LG Article No. Weight LG NL2 D3 D22) A rticle No. Weight 1500 rpm with order codes for bore diameters and tolerances (article number without "-Z") – selection in catalog part 3 m max.
w d ( w – p ith order codes for bore iameters and tolerances article number ithout "-Z") selection in catalog art 3 m Available ex stock Available at short term A vailable at short term kW mm l mm mm mm kg mm mm mm mm kg 80 M 0.55 19 x 22 40 19 x 40 24 x 50 24 x 50 28 x 60 28 x 60 28 x 60 38 x 80 2 0.9 1.0 1.1 1.2 1.4 1.5 1.6 1.65 26 3 SPZ 2 1 153 100 SPZ 2 1 100 SPZ 2 1 100 SPZ 2 1 100 SPZ 2 2 100 SPZ 2 2 100 SPZ 3 2 160 SPZ 3 2 160 2LC0900-0AF90-0AA0 L0L 12 180 40 110 38 2 L 2 L 2 L 2 L 2 L 2 L 2 L 2 L LC0900-0AA9 0L+M.. ■ -0AA0 12 80 M 0.75 2LC0900-0AF90-0AA0 L0L LC0900-0AA9 0L+M.. ■ -0AA0 90 S 1.1 2LC0900-0AF90-0AA0 L0P LC0900-0AA9 0P+M..
■ -0AA0 90 L 1.5 2LC0900-0AF90-0AA0 L0P LC0900-0AA9 0P+M.. ■ -0AA0 100 L 2.2 2LC0900-0AF90-0AA0 L0R LC0900-0AA9 0R+M.. ■ -0AA0 100 L 3 2LC0900-0AF90-0AA0 L0R LC0900-0AA9 0R+M.. ■ -0AA0 112 M 4 2LC0900-0AF91-0AA0 L0R 14 LC0900-0AA9 0R+M.. ■ -0AA0 132 S 5.5 2LC0900-0AF91-0AA0 L0V LC0900-0AA9 0V+M.. ■ -0AA0 ∅D2: • Without finished bore 1 • With finished bore – With order codes for diameter and tolerance (article number without "-Z") 9