VLT ® 2000 Series Description of parameters I 514 Bus bit 4 (BUS BIT 4) Value: ✭ Q stop (Q-STOP) [0] DC-brake (DC BRAKE) [1] I 606 Total operation hours (TOTAL OP HRS.) Description: See parameter 610 Description: See parameters 404, 306, 307 and 308. I 607 Running hours (RUNNING HRS.) Description: See parameter 610 I 516 Bus reference (BUS REFERENCE) Value: − 100.00% - +100.00% ✭ 0 Description: If you choose Local reference in parameter 003 after choosing a bus reference, the bus reference will be transferred to local reference. I 608 Number of power-ups (NO. POWERUPS) Description: See parameter 610 I 609 Number of over-temperature (NO.
OVERTEMPS) I 517 Store data values (STORE DATA) Value ✭ Off (OFF) [0] On (ON) [1] Description: See parameter 610 Description: Setting parameter 517 to On stores the downloaded values. Data values will be stored after you have pressed the “Menu” key. While the unit is storing data, the display will show (SAVE DATA) and flash in line C. I 610 Number of over-voltage (NO. OVERVOLTS) Description: Information stored by the VLT frequency converter for later analysis. Parameter 606-607 are only updated every hour. ✭ = Factory setting. Text in ( ) = Display text. The figures in [ ] are used in bus communication. 80 MG.20.B6.02 – VLT is a registered Danfoss trademark