INSTRUMENTS AND CONTROLS Vehicle Information Display Warning Information 1 information display uses two methods to These are: accompanied by a symbol the vehicle with an open door, bonnet or messages are re-enforced by an audible Messages and Symbols Two types of warning messages are displayed: Messages re-enforced by a red or yellow symbol and the illumination of a warning light. • Messages supported by a red or yellow symbol only. When a fault is detected, the appropriate warning message together with a symbol will appear in the display. The message will disappear after 3 seconds. If the warning is not supported by a warning light, the System Fault Warning will display in yellow or red.
The static symbol of the warning can be accessed by the operation of the trip computer switch. If a warning indicator is also illuminated, this will remain illuminated, until the fault is rectified. The vehicle information display contains the following information: 1 Warning information (figure A) 2 Trip computer menu (figure B) 3 Menu (figure C) 11 The vehicle convey warn • A messag • A view o boot/tailg Some warni warning. Warning M Two types o • Messages