INSTRUMENTS AND CONTROLS • Speed Warning • Next Service • Function Reset • TPMS Reset • Vehicle Options Speed Warning function can be set ‘off’ as required. 1 Next Service Shows the service interval announcement symbol, the estimated date of the next service and the distance remaining whichever is sooner before it should be carried out. Speed Warning For low line models, press and hold the button to set the speed warning. Repeatedly press the button to select your desired speed. The speed will change in increments of 5MPH (or 5 km/h) for each button press. Speed range is 5 - 120MPH (or 5 - 190 km/h). Select to return to upper level menu.
To reset the service information, select Reset then press and hold the button or the left hand thumbwheel until the displayed distance reads 15000 miles or 24000 km. Function Reset For high line models, the menu displays the current setting speed, ‘ + ’ and ‘ - ’ sign. Rotate the thumbwheel up (increase) or down (decrease) to change the speed as required. Speed range is 5 - 120MPH (or 5 - 190 km/h). The speed will change in increments of 5MPH (or 5 km/h). Select to return to upper level menu.
To reset the trip recorder readings, select Trip 1 , Trip 2 , Average Fuel , Average Speed , or All , then press and hold the button (low line cars) or the left hand thumbwheel (high line cars) to reset. Select to return to upper level menu. TPMS (Tyre Pressure Monitoring System) Reset When speed warning is active, the message Slow Down and an audible warning will indicate to the driver that the speed of the car exceeds the limit set. Select TPMS reset menu, then press and hold TPMS Reset . This will initialise the system. If successful, TPMS 21