Care & Maintenance Make sure to turn off the air purifier and disconnect power before cleaning. Cleaning the air purifier To ensure your purifier works and purifies properly, use a vacuum cleaner or soft cloth to remove any dust clinging to air holes or housing walls. Cleaning the laser particle sensor Use a non-sharp tool to open the cover of the laser particle sensor, then use an air blow gun or hair dryer to clean the sensor and the filter on the cover, as illustrated in the figure. Note: Do not use hot air. The filter in the filter compartment can be cleaned with water, please reinstall it after it is thoroughly dry. Note:
It is forbidden to directly rinse or spray the purifier with water. Do not wipe the purifier with a soaking wet cloth to prevent water from getting into it. 8